£89.99
The PTO Sling™ is an apparatus to hoist and support the weight of the implement driveline (PTO shaft) while attaching the driveline receiver to the tractor’s rear PTO spline, making the PTO connections easier, quicker and safer. This hoisting apparatus consists of three sections of 2″ strap (polyester webbing), J hooks, connecting hook plates, cam buckles, a center sliding cradle and HDPE stiffening boards and other integrated hardware.
The PTO Sling™ safely relieves the tractor operator’s usual need to hold and support a heavy implement shaft during the typical PTO connection process, which often requires manually lifting the driveline (as heavy as 100+ lbs.) and stooping or crouching at awkward angles while reaching for the PTO housing area for connection.
The PTO Sling™ by design uses the leverage points of both the tractor’s 3-point hitch and hydraulic system to achieve the lift and support needed during operation.
In stock
The PTO Sling™ is an apparatus designed to hoist and support the weight of the implement driveline (PTO shaft) while attaching the driveline receiver to the tractor’s rear PTO spline. This makes PTO connections easier, quicker, and safer. The hoisting apparatus consists of three sections of 50.8 mm polyester webbing strap, J hooks, connecting hook plates, cam buckles, a center sliding cradle, HDPE stiffening boards, and other integrated hardware. The PTO Sling™ relieves the tractor operator from manually holding and supporting a heavy implement shaft (which can weigh 45+ kg) during the connection process. This eliminates the need to stoop or crouch at awkward angles while reaching for the PTO housing area.
The PTO Sling™ leverages the tractor’s 3-point hitch and hydraulic system to lift and support the driveline. To install the PTO Sling™, follow one of these methods:
Horizontal Method (Preferred):
Vertical Method (Alternate):
Once installed, ensure the hooks are secure:
To fine-tune the strap’s length and tautness, adjust the pull loops or press the heavy-duty cam buckle levers. This allows you to raise or lower the PTO Sling’s cradle (and the driveline it supports) to the desired connection level of the tractor’s PTO. Use the hydraulic lift as needed to assist in positioning the driveline.
The cradle features an open pouch on its top side with dual pockets on opposite ends. Insert one or more of the three HDPE stiffening boards into the pouch to create the ideal balance of rigidity and flexibility. This keeps the weight of the implement driveline centered in the cradle and minimizes slide friction, allowing the driveline’s outer plastic sheath to slide smoothly toward the PTO housing area.
The PTO Sling™ is an apparatus designed to hoist and support the weight of the implement driveline (PTO shaft) while attaching the driveline receiver to the tractor’s rear PTO spline. This makes PTO connections easier, quicker, and safer. The hoisting apparatus consists of three sections of 50.8 mm polyester webbing strap, J hooks, connecting hook plates, cam buckles, a center sliding cradle, HDPE stiffening boards, and other integrated hardware. The PTO Sling™ relieves the tractor operator from manually holding and supporting a heavy implement shaft (which can weigh 45+ kg) during the connection process. This eliminates the need to stoop or crouch at awkward angles while reaching for the PTO housing area.
The PTO Sling™ leverages the tractor’s 3-point hitch and hydraulic system to lift and support the driveline. To install the PTO Sling™, follow one of these methods:
Horizontal Method (Preferred):
Vertical Method (Alternate):
Once installed, ensure the hooks are secure:
To fine-tune the strap’s length and tautness, adjust the pull loops or press the heavy-duty cam buckle levers. This allows you to raise or lower the PTO Sling’s cradle (and the driveline it supports) to the desired connection level of the tractor’s PTO. Use the hydraulic lift as needed to assist in positioning the driveline.
The cradle features an open pouch on its top side with dual pockets on opposite ends. Insert one or more of the three HDPE stiffening boards into the pouch to create the ideal balance of rigidity and flexibility. This keeps the weight of the implement driveline centered in the cradle and minimizes slide friction, allowing the driveline’s outer plastic sheath to slide smoothly toward the PTO housing area.
Be the first to know about new products, sales, and events.
[copyright]
Our office hours are Monday to Friday 9:00am to 5:00pm UK time, excluding Bank Holidays.
Please expect a response within 24 business hours.
